Search results for "Global warming potential"

Energy balance and life cycle assessment of small size residential solar heating and cooling systems equipped with adsorption chillers

2017

Abstract Solar heating and cooling systems for space heating and cooling are experiencing a growing trend and interest. However, the actual energy and environmental performance of small/medium size installations is not clearly foreseeable. In this paper, an analysis of such systems using adsorption chillers in different European climates is presented. Solar systems have been simulated in TRNSYS and compared to a conventional system employing a vapour compression unit. The results have been used for a Life Cycle Assessment (LCA) study, determining the potential impact during the whole life of the system, from raw materials supply to its end-of-life. The LCA has been carried out by using the …

Life cycle assessment of a new industrial process for sustainable construction materials

2023

One of the key sectors for the green transition of European countries is construction, that is more and more asked to evolve towards innovative ecological binders and green cost-effective processes. The construction sector is highly energy intensive, and the cement production is one of the main sources of environmental pollution in the world. In this regard, GeoPolymers (GP) seem to be promising for a sustainable replacement of cementitious materials. Therefore, the Life Cycle Assessment (LCA) of the industrial production of different formulations of Geopolymer Concrete (GC) was performed in this study after scaling up the Life Cycle Inventory (LCI) from a laboratory scale to an industrial …

Energy-environmental assessment of the UIA-OpenAgri case study as urban regeneration project through agriculture

2020

Abstract Sustainable agriculture is strongly promoted by Agenda 2030 and peri-urban agriculture is considered strategic for agri-food sustainability. Although, innovative farming practices are being implemented, the analysis of their impacts often does not reach the required depth. Within the EU project ‘UIA-OpenAgri - New Skills for new Jobs in Peri-urban Agriculture’, a regeneration process of a peri-urban area in Milan (Italy) was started, through the development of an innovative food hub. 28 innovative foodchains are assessed by a Life Cycle Assessment approach based on primary data collected from the involved start-ups. Non-Renewable Cumulative Energy Demand and the Global Warming Pote…

Greenhouse gases from sequential batch membrane bioreactors: A pilot plant case study

2016

Abstract The paper reports the results of nitrous oxide (N 2 O) emissions from aerobic and anoxic tank of a Sequential Batch Membrane Bioreactor (SB-MBR) pilot plant. The influence of salinity variation on N 2 O emission was analyzed by gradually increasing the inlet salt concentration from 0 to 10 g NaCl L −1 . The observed results showed that the N 2 O concentration of the gaseous samples was strongly influenced by the salt concentration. This result was likely related to a worsening of the nitrification activity due to the effect of salinity on autotrophic bacteria. Dissolved oxygen concentration and salinity were found to be the key factors affecting N 2 O concentration in the gaseous s…

Economic and environmental sustainability of submerged anaerobic MBR-based (AnMBR-based) technology as compared to aerobic-based technologies for mod…

2015

[EN] The objective of this study was to assess the economic and environmental sustainability of submerged anaerobic membrane bioreactors (AnMBRs) in comparison with aerobic-based technologies for moderate-/high-loaded urban wastewater (UWW) treatment. To this aim, a combined approach of steady-state performance modelling, life cycle analysis (LCA) and life cycle costing (LCC) was used, in which AnMBR (coupled with an aerobic-based post-treatment) was compared to aerobic membrane bioreactor (AeMBR) and conventional activated sludge (CAS). AnMBR with CAS-based post-treatment for nutrient removal was identified as a sustainable option for moderate-/high-loaded UWW treatment: low energy consump…

Environmental impact of submerged anaerobic MBR (SAnMBR) technology used to treat urban wastewater at different temperatures

2013

[EN] The objective of this study was to assess the environmental impact of a submerged anaerobic MBR (SAnMBR) system in the treatment of urban wastewater at different temperatures: ambient temperature (20 and 33 degrees C), and a controlled temperature (33 degrees C). To this end, an overall energy balance (OEB) and life cycle assessment (LCA), both based on real process data, were carried out. Four factors were considered in this study; (1) energy consumption during wastewater treatment; (2) energy recovered from biogas capture; (3) potential recovery of nutrients from the final effluent; and (4) sludge disposal. The OEB and LCA showed SAnMBR to be a promising technology for treating urban…

Energy and environmental analysis of a mono-familiar Mediterranean house

2008

Energy and environmental life-cycle impacts of solar-assisted systems: The application of the tool “ELISA”

2020

Abstract Solar heating and cooling (SHC) systems can be relevant in the achievement of energy and climate European goals. The benefits of these technologies should be evaluated taking into account their life-cycle energy and environmental impacts, calculated by applying the Life Cycle Assessment (LCA). The development of a complete LCA can be difficult and time-consuming particularly for non-experts in LCA, discouraging them in developing the life-cycle assessments. To overcome this issue, the paper presents “ELISA - Environmental Lifecycle Impacts of Solar Air-conditioning systems”, a user-friendly simplified tool for estimating the life-cycle energy and environmental benefits/impacts of s…

Economic analysis of the scale-up and implantation of a hollow fibre membrane contactor plant for nitrogen recovery in a full-scale wastewater treatm…

2021

[EN] Nitrogen recovery technologies such as the hollow fibre membrane contactor are now being developed. However, an economic analysis is needed prior to their full-scale application in wastewater treatment plants. The aim of this study was to analyse the economic and environmental aspects of scaling-up this method. To achieve it, a full-scale 40,000 m3·day¿1-wastewater treatment plant influent flow rate was simulated jointly with a membrane contactor plant to evaluate the minimum costs of optimum operating conditions of membrane contactors (pH, feed flow rate and membrane surface). The optimum conditions for treating 600 m3·day¿1 of reject water was found to be 10 pH, 0.08 m3·s¿1 feed flow…

Greenhouse gases from membrane bioreactors: a pilot plant case study

2015

In this study the N2O emitted from the aerobic and anoxic tank of a Sequential Batch (SB) Membrane Bioreactor (MBR) pilot plant has been investigated. The SB-MBR pilot plant was fed with a mixture of synthetic and real wastewater. The influence of salinity on N2O concentration was analyzed by gradually increasing the salinity by addition of salt to concentrations ranging from 0 to 10 gNaCl L-1. The results demonstrated that the N2O concentration of the gaseous samples was strongly influenced by the salinity in the range of 0.25 ppm to 3.4 ppm salinity. This result was explained by lower autotrophic kinetics due to the biomass lysis. Dissolved oxygen concentration and salinity were found to …